Marketfield Way

Redhill, Storbritannia

Tensar’s T-Value design method delivered a pilingmat that was 33% thinner than the original design, cutting construction time and costs,with less environmental impact.

Benefits

  • 33% thinner piling mat
  • 20% savings in construction cost time savings
  • 18% reduction in construction programme
  • Reduced carbon emission by around 240t CO2e  

 

Client's Challenge

Vinci Construction UK needed to install a 5,000m2 piling mat for a development in Redhill town centre. The original design required excavating the underlying peat and weak clays to 1.2m and replacing them with recycled engineering fill, to create a safe working area at ground level. However, after attending a T-Value design method workshop, Vinci asked Tensar to see if savings could be made.

Tensar Solution

The T-Value design method analysed the full benefits of a Tensar mechanically stabilised layer using locally available demolition granular material designed to take project specific ground conditions and loading into account to provide a safe working platform for site operations. Tensar’s proposal reduced fill volumes and excavation quantities, cutting installation costs by around 20%, the construction programme by approximately 18%. It also reduced the environmental impact by reducing carbon emissions by around 240t CO2. 

Products Used

Loading...

Det er ingen resultater som samsvarer med søket ditt. Prøv et annet søk, eller Kontakt oss dersom du har ytterligere spørsmål.